manufacturer category series package voltage class rev . date EV32C6 series ? rohs compliant (pb-free) voltage controlled crystal oscillator (vcxo) 3.3v supply voltage hcmos output with tri-state function ceramic 6-pad smd package apr performance to 100ppm commercial and industrial temperature range ecliptek corp. oscillator EV32C6 ceramic 3.3v os59 11/06 oscillator EV32C6 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. electrical specifications h 1.65 l 7.0 w 5.0 frequency range (f o ) operating temperature range (otr) storage temperature range (str) supply voltage (v dd ) input current (i dd ) frequency tolerance/stability output voltage logic high (v oh ) output voltage logic low (v ol ) rise time / fall time (t r /t f ) duty cycle (sym) load drive capability (c load ) aging (at 25c) start up time (t s ) tri-state input voltage rms phase jitter absolute pull range (apr) linearity control voltage (v c ): test conditions for apr control voltage range (v cr ) transfer function input impedance (z i ) input leakage current modulation bandwidth (mbw) typical phase noise (fo = 27.000mhz) inclusive of all conditions: calibration tolerance at 25c, frequency stability over the operating temperature range, supply voltage change, output load change, shock, and vibration i oh = -4ma i ol = +4ma 20% to 80% of waveform at 50% of waveform < 12.288mhz > 12.288mhz v ih : no connection v ih : >0.9v dd v il : <0.1v dd f j =12khz to 20mhz inclusive of all conditions: calibration tolerance at 25c, frequency stability over the operating temperature range, supply voltage change, output load change, shock, vibration, and aging over control voltage (v c ) -3db, v c = 1.65v dc at offset of 10hz at offset of 100hz at offset of 1khz at offset of 10khz at offset of 100khz 0c to 70c or -40c to 85c -55c to 125c 3.3v dc 10% 15ma maximum 50ppm maximum 90% of v dd minimum 10% of v dd maximum 5 nseconds maximum 50 5(%) typical, 50 10(%) maximum 10ttl load or 30pf hcmos load maximum 15pf hcmos load maximum 2ppm/1st year typical, 10ppm /10 years max. 10 mseconds maximum enables output enables output disables output: high impedance 1psec maximum 50ppm minimum 80ppm minimum < 51.840mhz only 100ppm minimum < 36.000mhz only 10% typical, 20% maximum 0.3v dc to 3.0v dc 0.0v dc to v dd positive transfer characteristic 50kohms minimum 10a maximum 10khz minimum -70dbc/hz -100dbc/hz -130dbc/hz -147dbc/hz -152dbc/hz 1.544mhz, 2.000mhz, 2.048mhz, 3.088mhz, 3.580mhz, 3.686mhz, 4.000mhz, 4.032mhz, 4.096mhz, 4.434mhz, 5.000mhz, 6.144mhz, 6.176mhz, 6.312mhz, 6.400mhz, 8.000mhz, 8.192mhz, 8.448mhz, 10.000mhz, 12.000mhz, 12.288mhz, 12.352mhz, 12.960mhz, 13.000mhz, 13.500mhz, 14.318mhz, 15.360mhz, 15.440mhz, 16.000mhz, 16.384mhz, 16.660mhz, 17.664mhz, 18.432mhz, 19.200mhz, 19.440mhz, 20.000mhz, 20.480mhz, 24.000mhz, 24.576mhz, 24.704mhz, 25.920mhz, 26.000mhz, 27.000mhz, 28.636mhz, 30.000mhz, 30.720mhz, 32.000mhz, 32.768mhz, 34.368mhz, 35.328mhz, 36.864mhz, 38.880mhz, 40.000mhz, 40.960mhz, 44.736mhz, 50.000mhz, 51.840mhz, 52.000mhz, 62.208mhz, 65.536mhz, 74.250mhz, 77.760mhz
manufacturer category series package voltage class rev . date ecliptek corp. oscillator EV32C6 ceramic 3.3v os59 11/06 EV32C6 b 3 a 1 - 35.328m tr operating temperature range a=0c to 70c, b=-40c to 85c absolute pull range (apr) 3=50ppm minimum, 4=80ppm minimum, 5=100ppm minimum part numbering guide a b c d e f 16.3-.1 7.5.1 6.75.1 4 .1 2.1 f g h j k l 8.1 b0* 1.5 +.1-0 a0* .3 .05 k0* tape m n o p q 1.5 min 50 min 20.2 min 13.2 40 min r s t u v qty/reel 2.5 min 10 min 22.4 max 360 max 16.4+2-0 1,000 reel *compliant to eia 481a mechanical dimensions all dimensions in millimeters marking specifications environmental/mechanical specifications suggested solder pad layout all dimensions in millimeters tape and reel dimensions all dimensions in millimeters tolerances= + 0.1 line 1: ecliptek line 2: xx.xxx m frequency in mhz (5 digits maximum + decimal) line 3: xx y zz week of year last digit of year ecliptek manufacturing identifier 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. pin 1: c ontrol voltage (v c ) pin 2: tri-state pin 3: case ground pin 4: output pin 5: no connect pin 6: supply voltage available options blank=bulk (standard) tr=tape and reel frequency characteristic specification fine leak test mil-std-883, method 1014, condition a gross leak test mil-std-883, method 1014, condition c mechanical shock mil-std-202, method 213, condition c vibration mil-std-883, method 2007, condition a solderability mil-std-883, method 2002 temperature cycling mil-std-883, method 1010 resistance to soldering heat mil-std-202, method 210 resistance to solvents mil-std-202, method 215
|
